Alto-Shaam Vector VMC-H3H

MAINTENANCE
Ve ct or ™ H Se ries ▪ S ervice Ma nual ▪ MN -4 654 4 ▪ Rev 0 1 ▪ 11/19
47
Continued from previous page
4. Re-install the jet plates and cooking racks.
Cleaning the filters 5. Remove the filters d.
6. Clean the filters in a dishwasher.
7. Re-install the filters.
8. Set the main disconnect switch to the ON position when complete.
Result The oven is now clean.

NOTE: Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing toward
the food.

NOTE: Replace the filters at least once a year.
VMC-TS-007616
(optional)
d
d