Alto 120V User Manual

Form No. 70243A 5/03 CLARKE TECHNOLOGY Printed in the U.S.A.
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your ALTO
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If your
operator(s) cannot read this manual, have it explained fully before attempting to operate this
machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: ALTO U.S. INC., 2100 Highway 265, Springdale, Arkansas 72764.
Operator's Manual
Manuel d'utilisation
Libro de Instrucciones
Ultra Speed
Burnisher
120V & 230V
with NEMA Plug

Alto 120V Specifications

General

Brand	Alto
Model	120V
Category	Floor Machine
Language	English

Summary

Operator Safety Instructions

General Safety Warnings and Precautions

Details critical safety warnings, including DANGER, WARNING, and CAUTION statements.

Features and Specifications

Product Specifications Overview

Technical details and model specifications for the burnisher, including voltage, current, and power.

Burnishing Pad Selection Guide

A chart detailing different burnishing pads, their application, and recommended use.

120 Volt Machine Electrical Connection

Grounding and Power Supply Connection

Instructions for safely connecting the 120V machine to the electrical ground and power.

Extension Cord Guidelines

Recommendations and warnings for using extension cords with the 120V machine.

230 Volt Machine Electrical Connection

Grounding and Power Supply Connection

Instructions for safely connecting the 230V machine to the electrical ground and power.

Extension Cord Guidelines

Recommendations and warnings for using extension cords with the 230V machine.

Machine Preparation for Operation

Pad Installation and Pressure Adjustment

Step-by-step guide for installing pads and adjusting the pad pressure for optimal performance.

Operating the Machine

Starting and Stopping Procedures

Instructions on how to safely start, operate, and stop the burnisher.

Circuit Breaker Functionality

Explanation of the circuit breaker's role in motor protection and how to reset it.

Machine Storage and Maintenance

Proper Storage Procedures

Guidance on how to store the machine safely and correctly to prevent damage.

Inspection and Repair Guidelines

Recommendations for annual maintenance inspections and authorized repair procedures.

Troubleshooting Machine Problems

Performance Issues: No Power or Start

Solutions for when the machine does not run, start, or has power issues.

Indicator Lights and Vibration Problems

Diagnosing and resolving issues related to the pressure gauge, brush light, and excessive vibration.

Parts and Service Manual

Maintenance and Component Checks

Detailed maintenance procedures, including motor care, brush wear indicators, and commutator checks.

Assembly Parts List

Comprehensive list of all parts used in the machine assembly, with part numbers and quantities.

Electrical Schematic Diagram

Wiring diagram illustrating the electrical components and connections of the machine.

Motor Drawing and Parts List

Detailed diagram of the motor assembly and its associated parts list.

Product Support and Contact Information

US Support Locations and Services

Directory of Clarke's US production facilities, service centers, and sales distribution points.

Global Support Network

List of international subsidiaries and contact information for product support outside the US.

Clarke Technology US Warranty

Product Warranty Coverage Details

Information on the warranty period, what is covered, and what is excluded for the product.

Warranty Service and Claim Procedures

Instructions on how to obtain warranty service, including contacting repair locations and shipping.