To Next Page
M
Mrs. Yolanda CurtisAug 9, 2025
What to do if Alto ATS 46 has poor water pick-up at squeegee?
- MMichele BellAug 9, 2025
If the Alto Floor Machine exhibits poor water pick-up at the squeegee, several factors could be at play. First, examine the squeegee rubber blade for cuts or worn spots, and replace it if necessary. Second, check for clogging in the water pick-up system; repair or replace any compromised hoses and connections. Third, address any air leaks in the suction hose and connections by repairing or replacing them. Also, repair or replace gaskets if there are air leaks at the recovery tank cover or manifold gaskets. Check the vacuum motor and seal on the recovery tank. Lastly, ensure the drain hose or drain plug in the recovery tank is properly closed; repair or replace if leaking.
General
