To Next PageTo Next Page
Need help?Do you have a question about the Alto SSB 430 and is the answer not in the manual?
General| Category | Floor Machine |
|---|---|
| Model | SSB 430 |
| Brush Diameter | 430 mm |
| Weight | 84 kg |
| Working Width | 430 mm |
General safety advice for operating the cleaning machine.
Safety precautions for transporting the machine.
Safety instructions for using cleaning agents.
Covers dust, liquids, gradients, electrical, and battery hazards.
Safety checks before putting the machine into operation.
Safety guidelines to follow while the machine is in use.
Safety precautions for maintenance and repair activities.
Defines the intended use of the automatic cleaning machine.
Identifies and explains the various controls of the machine.
Lists the items included with the machine.
Instructions for assembling the cleaning machine.
Step-by-step guide to attach the suction nozzle.
Instructions for inserting and connecting the battery for SSB 430.
Guide for connecting the SSE 430 model to the power supply.
Instructions on how to attach and secure the brush.
Procedure for filling the fresh water tank.
Steps for operating the brushing and vacuuming functions.
How to monitor key operational parameters.
Adjusting the quantity of cleaning agent dispensed.
Checking and managing the dirty water tank level.
Understanding the battery warning lamp on the SSB 430.
Covers working methods, applications, and examples.
Lists available accessories and their part numbers.
Details cleaning agents, their pH values, and packaging.
Steps for safely turning off the machine.
Procedures for emptying and cleaning the dirty water tank.
Instructions for emptying and cleaning the fresh water tank.
How to clean the suction nozzle wiper lips.
Steps to remove and clean brushes or pads.
Guide for charging the battery of the SSB 430 model.
How to store the machine properly when not in use.
Schedule of maintenance tasks for different frequencies.
Procedure to flush the machine's piping system.
Steps to clean the fresh water filter.
Instructions for cleaning the dirty water filter.
Guide on how to replace the suction lips on the nozzle.
Information on professional maintenance services.
Safety and operational guidelines for batteries.
Troubleshooting power failures and low suction force.
Resolving problems with cleaning agent dispensing.
Addressing issues causing stripes from the suction nozzle.
Guidelines for decommissioning and recycling the machine.
Details regarding the product warranty.
Information on required testing and certifications.
Specifications and technical details of the machine.
Statement confirming compliance with EC directives.
