39
1
3
2
1
6.5 Removing and cleaning
the cleaning tools
6.5.1 SSE 430
1. Connect to power supply.
2. Lift suction nozzle using lever
(1).
3. Tilt machine backward until
brush or pad is no longer
touching the floor.
4. Press release switch (2) and
briefly press hand switch (3).
5. Cleaning tool is released
automatically from its
mounting.
6. Disconnect from mains.
7. Clean cleaning tool (brush or
pad) with clean water.
6.5.2 SSB 430 1. Lift suction nozzle using lever
(1).
2. Reach into fresh water tank
through opening and lift
automatic cleaning machine.
3. Release brush/pad by turning
firmly in a clockwise
direction and remove.
4. Clean cleaning tool (brush or
pad) with clean water.
6.6 Charging the battery
(SSB 430)
1. Tilt up dirty water tank.
2. Disconnect battery
connecting plug.
3. Attach battery connecting
plug to charger.
4. Connect charger to power
supply and switch on.
To Next Page
Loading...
