Alto SSB 430 - Cleaning Cleaning Tools

41
0
1
2
3
4
5
1
2
1
7. 2 Maintenance work
7.2.1 Flushing piping system
with clean water
1. Pour approx. 3 l of clean
water into empty fresh water
tank.
2. Connect to power supply.
3. Fit disk brush.
4. Set „cleaning agent supply“
switch to ON.
5. Move metering lever to
position „4“.
6. Operate machine briefly,
collect escaping water or
pick up using the machine.
7.2.2 Cleaning fresh water
filter
1. Empty dirty water tank.
2. Empty fresh water tank.
3. SSB 430: Remove battery.
4. Remove suction nozzle.
5. Put machine on its side.
6. Unscrew lid (1).
7. Remove filter (2) and flush
out with fresh water.
8. After cleaning, replace filter
and screw lid on.
9. Place machine in upright
position.
10.Fit suction nozzle.
7.2.3 Cleaning dirty water
filter
1. Open tank lid.
2. Remove filter (1) and rinse
with fresh water.
3. Replace after cleaning and
gently press into position.