Alto SSB 430 - Control and Operation; Brushing and Vacuuming

35
I
1
1
I
4.2 Monitoring operation
4.2.1 Metering the quantity of
cleaning agent
WARNING!
Brush must never be allowed to
run dry in order to prevent
damage to the floor or the
machine. Add sufficient cleaning
fluid during machine operation.
4.2.2 Dirty water tank filling
level
If the dirty water tank is full, the
suction unit must be switched
off. To do this, move „suction
unit“ switch (1) to OFF.
WARNING!
Suction unit does not
automatically switch off when
dirty water tank is full!
Always empty dirty water tank
when filling fresh water tank for
this reason.
4.2.3 SSB 430
Battery warning lamp
If the red battery warning lamp
(1) illuminates, the battery has
low charge and the machine
switches off after approx. 3
minutes.
1. Pick up remaining water and
stop working.
2. Charge battery.