10
4.0 Fields of application and working methods GB
4.1 Fields of application
The most important fields of application for this product are:
Agriculture Cleaning of machinery, agricultural implements, stalls, equipment, and
buildings.
Transport Cleaning of trucks, buses, cars etc.
Light industries Degreasing and cleaning of machines, workpieces, and vehicles.
Service Cleaning of vehicles, cleaning of public paths, institutions etc.
Domestic use Car, motor cycle, boat, caravan, trailer, tiles, wood works, roofs, outhouses,
greenhouses, barbecue, garden furniture etc.
4.2 Working pressure
The high pressure washer may be used with high or low pressure at your own option.
Low pressure Is first and foremost used for application of detergents and for washing off.
High pressure Is used for cleaning.
4.3 Detergents
The most efficient cleaning is reached with detergents in conjunction with the high pressure cleaning. For
that purpose ALTO can offer you a series of products specially developed for high pressure cleaning,
among other fields within:
Cleaning of cars, caravans, boats etc. Descaling
Cleaning of tiles, roofs, wood works etc. Degreasing of workpieces
Cleaning of buildings, machinery, stalls etc. Disinfection
The products are water-based, without phosphates, and the applied tensides (surface active substances)
comply with the present requirements for easy biodegradability.
Contact your ALTO distributor for directions as to which product will fulfill your requirements.
The method of application and the dosage of the individual products appear on the product labels or the
data sheet. The dosage is adjusted on the high pressure washer.
4.4 Dosing of detergent
The high pressure washer features a built-in injector enabling dosing of detergent to the water when the
cleaner is in low pressure mode. With this dosing unit it is possible to vary the dosing of detergent infinitely
between 0-5%, and thus most cleaning jobs will be covered (also see section 3.1.5).
Change from application of detergent under low pressure to cleaning under high pressure is simply effected
by switching from »low pressure mode« to »high pressure mode« on the spray lance. You will not have to
mount or dismount any parts by normal use of detergent.
For foam cleaning you will have to mount the special foam injector between the high pressure washer and
the high pressure hose. Insert the suction hose of the injector into the foam detergent. Mount foam lance
on spray handle and you are now ready for foam application. Upon the application dismount the foam
injector and replace the foam lance by a spray lance and you are ready for cleaning.
To Next Page
Loading...
