Alto MISTRAL 900 User Manual

2
3. CONTROL ELEMENTS
SPOTLIGHT
1
POWER SWITCH
It switches the amplifier ON and OFF.
2
CLIP LED
When the signal distortion reaches or surpasses 0.5% , the LED lights up. This
means the output level of signal source is too high and it is time to reduce the
input level until the LED turns off.
3
OUTPUT LIMITER LED
When the unit limits the output signal, the LED lights up.
4
OPERATION AND PROTECTION LED
When there presets signal, the yellow LED lights up. When at protection status,
the LED turns off.
5
POWER LED
This LED lights up when the unit is powered on.
6
LEVEL CONTROL (For CH1&CH2)
Adjust the output signal level to avoid signal distortion.
1
2 3
4 5 6
LTO
R
CH1
CLIP
LIMIT
OPERATING/
PROTECTION
POWER ON
POWER
ON
OFF
Stereo Power Amplifier
1500
CH2

Alto MISTRAL 900 Specifications

General

Brand	Alto
Model	MISTRAL 900
Category	Amplifier
Language	English