Need help?Do you have a question about the Alto MC700.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 0.775V (0 dBu) |
| EQ | No |
| Dimensions | 88 x 483 x 420 mm (3.5" x 19" x 16.5") |
| Frequency Response | 20Hz - 20kHz |
Details the power switch, LEDs, input level indicators, protection, limiter, level controls, and fans.
Covers input terminals, mode selectors, output terminals, breaker, and power cord.
Explains dip switch functions for clip limit, filters, and output modes.
Instructions for connecting the power cord and setting voltage.
Guidelines for mounting the amplifier in a rack.
How to connect and operate the amplifier in stereo mode.
How to connect and operate the amplifier in parallel mode.
How to connect and operate the amplifier in bridge mode.
General advice for installing the amplifier into a sound application system.
Precautions for connecting speakers and using fuses.
Process for registering the product for warranty service.
Procedures for returning the product for warranty service.
Details warranty terms, conditions, and limitations.
To Next Page
