2.2.3. Shipping Case Contents
Table 2: Shipping Contents
Power Cable;
unterminated
** - SIM Card not included
A full APS-3 system consists of the following items:
A UHF Radio Antenna should be connected to the
APS-3’s TNC connector before powering ON
Provides internal power to the APS-3
Charge the lithium-ion batteries
Handheld Controller
Device
Configure and control the APS-3
RS232/Serial connectivity to handheld controller or
computer. [Required when upgrading firmware]
Communication to devices such as external radios or
modems
Provide 9-15 VDC external power with use of battery
or power supply
2GB memory card for internal data logging
A secure GSM SIM card receptacle