3.3.  Battery & Charger 
 
The APS-3 comes with two lithium-ion rechargeable batteries with a typical operating 
time between 8 to 10 hours. 
 
3.3.1.  Battery Charger 
 
AC Adapter 
 
Input:  100-240VAC ~50/60Hz 1.7A 
Output:   19.0VDC @ 3.16A 
 
3.3.2.  Charging Battery 
 
Table 7:  Battery Charging Description 
Battery Bay 1 
 
 
 
 
Battery Bay 2 
 
 
LED Status Indicator: 
  Battery  Bay 
2 
  Battery  Bay 
1 
 
Power for Battery Charger 
 
  Plug the AC cord to AC Adapter 
  Plug in AC Adapter to Battery Charger 
  Plug  the  AC  wall  battery  charger  into  the  wall  socket  and 
power LED turns ON  
  Place your battery in charger bay correctly 
  Wait  until  battery  LED  indicator  turns  GREEN  for  a  full 
charge 
 
Battery is not seated correctly 
Battery is being re-charged 
Charge error or bad battery 
 
 
A fully discharged battery will take approximately 2 hours to fully charge and 
may not light the LED status indicator when first mounted.