2.2.10.2. Installing SIM Card
Turn Off APS-3 to install or remove SIM card. Damage to SIM card may occur if
installed or ejected with power ON.
To Install/Remove SIM Card:
Unlock SIM & SD Card compartment by turning lock groove
horizontal
Open SIM & SD Card compartment
Push the yellow SIM Card holder eject button to release SIM
Holder
Pull out SIM Holder
Place SIM Card in SIM Card Holder
Hold the SIM Card in holder upside down
Using the guide, slide SIM Card Holder in the slot. The eject button will pop out.
To Next Page
Loading...
