Need help?Do you have a question about the Amada Promecam ITS 103 and is the answer not in the manual?
Safety equipment provided with press brakes.
Guidelines for safe operation and precautions.
Rules and precautions for safe bending operations.
Requirements for connecting the machine to electrical power.
Steps before handling and installing the machine.
Guidelines for lifting and moving the machine.
Identification of controls within the electrical cabinet.
Initial steps to power on the machine.
Function keys and their uses on the NC control panel.
How to operate and use the light guard safety system.
Overview of the MB numerical control system.
Technical specifications of the MB numerical control.
Different versions and management of machine axes.
Critical instructions for safe operation.
How to adjust the pressure regulator for force control.
Setting the hydraulic gauge block for bending depth.
Initial steps before using the MB numerical control.
List and explanation of error codes.
Table of failures, causes, and corrective actions.
Steps for draining and refilling the hydraulic system.
General| Brand | Amada Promecam |
|---|---|
| Model | ITS 103 |
| Category | Power Tool |
| Language | English |
To Next Page