Amada Promecam ITS 125/30 - User Manual

PROMECAM
HYDRAULIC PRESS BRAKES
I.T.S
TECHNICAL MANUEL
63, Rue de Strasbourg 93206 Saint Denis Cedex 1 - FRANCE Tel: 161 4821 60 06 TELEX: 232717 Telec. : 161 48 22 61 57

Summary

Safety

Safety Instructions and Rules

Provides mandatory instructions and rules for safe operation of the press brake.

Installation Requirements

Electrical Connection

Covers power supply, mains characteristics, cable specifications, and voltage checking.

Installation

Handling and Installation Instructions

Details pre-installation steps, floor preparation, and forbidden handling operations.

Handling Principles and Accessories

Provides principles for safe lifting and handling, and explains handling accessories.

Levelling of the Machine

Machine Commissioning

Technical Description

Mechanical Structure and Connections

Details the machine's mechanical structure, connections, and guidance systems.

Y Axis Mechanism and Speed Sequence

Rear Gauge Assemblies

Description and Model Mechanisms

Location of Control Devices

Electrical Cabinet Controls

NC Control Panel Operation

Light Guard Operation

Details safety standards, modes (GUARD ONLY, SINGLE BREAK, DOUBLE BREAK), and reset procedures.

MB Numerical Control (Option)

Description and Characteristics

Axes Management and Diagrams

Control Panel Boards

Bending Techniques

Bending Methods and Techniques

Use Without Numerical Control

Preliminary Operations and Recommendations

Force and Depth Setting

Use of Numerical Control (Type MB)

Operations and Programming Basics

Program Management and Corrections

Teaching Mode and Self-Diagnostic

Procedure for using teaching mode and running the self-diagnostic program.

Error Messages and Troubleshooting

Lists error messages and provides troubleshooting guidance for common failures.

Numerical Control Customization

Access and Key Value Settings

Programming

Part and Bend Programming

Pinch and Depth Finding

Production Execution

Routine Maintenance Operations

Machine Maintenance (Hydraulic System)

Details draining and filling the hydraulic system, pipe tightening, and periodic oil checks.

Rear Gauge Assembly Maintenance

Adjustable Intermediate Sets

Amada Promecam ITS 125/30 Specifications

General

Brand	Amada Promecam
Model	ITS 125/30
Category	Power Tool
Language	English