IPB-5000B
5. Installation and Connection
5-1
5. Installation and Connection
(1) Installation
When planning for the installation, allow at least the figured clearance on each
side from the wall, as referred to the figures below, for improving the effect of heat
release.
Allow at least 10 cm or more from the end of the Wiring Outlet projected at the
Output Terminal Cover in the rear potion of IPB-5000B.
As IPB-5000B should be air-cooled, do not install it in a closed area.
[Front View] [Top View]
10cm or more
Outlet
POWERSTART
CURSOR
WELD MENU RESET
ENTER
＋－
10cmormore
10cm or more
Air Inlet
Air Inlet
10cm or more
Air Inlet
Air Inlet
Outlet
(Front Portion)
(Rear Portion)
Wiring Outlet
Output Terminal
Cover
To Next Page
Loading...
