Amana AMS81405DN User Manual

BLOWER PERFORMANCE SPECIFICATIONS
10
NOTES:
• CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer.
• All furnaces ship as hig-speed cooling. Installer must adjust blower cooling speed as needed.
• For most jobs, about 400 CFM per ton when cooling is desirable
• INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.
• The chart is for information only. For satisfactory operation, external static pressure must not exceed values shown on the rating plate. The shaded area
insicated ranges in excess of maximum static pressure allowed when heating.
• The dashed (---) areas indicate a temperature rise not recommended for this model.
• At higher altitudes, a properly de-rated unit will have approximatley the same temperature rise at a particular CFM, while ESP at the CFM will be lower.
AMS8
Ton s AC
at 0.5" 0.6 0.7 0.8
ESP CFM RISE CFM RISE CFM RISE CFM RISE CFM RISE CFM CFM CFM
HIGH 3.0 1521 ---- 1466 ---- 1414 ---- 1373 ---- 1298 ---- 1243 1164 1075
AMS80403AX MED 2.5 1160 26 1160 26 1132 26 1121 26 1082 27 1042 997 925
(MEDIUM) MED-LO 2.0 961 31 955 31 948 31 932 32 913 33 882 821 803
LOW 1.5 781 38 785 38 781 38 773 38 761 32 745 716 668
HIGH 3.0 1422 31 1352 33 1307 34 1197 37 1157 38 1092 1075 983
AMS80603AX MED 2.5 1098 40 1081 41 1051 42 1039 43 1021 44 983 924 868
(MEDIUM) MED-LO 2.0 919 48 913 49 892 50 847 ---- 829 ---- 818 792 728
LOW 1.5 758 ---- 741 ---- 741 ---- 733 ---- 699 ---- 677 649 626
HIGH 4.0 2134 21 2100 21 2042 22 1975 23 1883 24 1786 1700 1601
AMS80604BX MED 3.5 1668 27 1663 27 1656 27 1645 27 1616 28 1549 1492 1391
(MEDIUM) MED-LO 3.0 1419 31 1426 31 1426 31 1432 31 1419 31 1378 1328 1261
LOW 2.5 1134 39 1145 39 1166 38 1171 38 1160 38 1144 1111 1071
HIGH 4.0 2051 ---- 1983 ---- 1895 ---- 1812 ---- 1725 ---- 1627 1530 1439
AMS80804BX MED 3.5 1736 ---- 1708 35 1652 36 1611 37 1540 38 1475 1394 1307
(MEDIUM) MED-LO 3.0 1693 35 1668 36 1459 41 1429 41 1389 43 1339 1274 1204
LOW 2.5 1200 49 1185 50 1180 50 1173 51 1158 51 1125 1125 1080
HIGH 5.0 2290 ---- 2229 ---- 2155 ---- 2047 ---- 1960 ---- 1837 1712 1584
AMS80805CX MED 4.0 1852 ---- 1820 ---- 1777 ---- 1719 --- 1641 36 1567 1469 1382
(MEDIUM) MED-LO 3.5 1615 37 1592 37 1556 38 1516 39 1470 40 1405 1346 1235
LOW 3.0 1290 46 1285 46 1265 47 1235 48 1214 49 1174 1044 904
HIGH 5.0 2323 ---- 2225 ---- 2120 35 2040 36 1974 38 1801 1688 1577
AMS81005CX MED 4.0 1858 40 1847 40 1799 41 1744 42 1674 44 1577 1493 1399
(MEDIUM) MED-LO 3.5 1596 46 1587 47 1571 47 1552 48 1493 50 1397 1326 1217
LOW 3.0 1291 57 1272 58 1261 59 1257 59 1205 61 1168 1118 1060
HIGH 5.0 2469 ---- 2389 ---- 2300 ---- 2223 40 2131 42 2027 1902 1786
AMS81205DX MED 4.0 1575 56 1558 57 1545 58 1513 59 1500 59 1419 1354 1271
(MEDIUM) MED-LO 3.5 1402 63 1380 64 1343 66 1319 67 1296 69 1245 1183 1106
LOW 3.0 1200 ---- 1186 ---- 1161 ---- 1127 ---- 1082 ---- 1042 995 926
HIGH 5.0 2469 42 2389 43 2300 45 2223 47 2131 49 2027 1902 1786
AMS81405DN MED 4.0 1575 66 1558 67 1545 67 1513 69 1500 69 1419 1354 1271
(MEDIUM) MED-LO 3.5 1402 ---- 1380 ---- 1343 ---- 1319 ---- 1296 ---- 1245 1183 1106
LOW 3.0 1200 ---- 1186 ---- 1161 ---- 1127 ---- 1082 ---- 1042 995 926
(CFM & Temperature Rise vs. External Static Pressure)
0.1 0.2 0.3 0.4 0.5
Model
Heating Speed
As Shipped
Motor
Speed
EXTERNAL STATIC PRESSURE (Inches Water Column)

Amana AMS81405DN Specifications

General

Brand	Amana
Model	AMS81405DN
Category	Furnace
Language	English