Amana AXP Series - Page 47

Manual Operation of Magnetron #2
Screen This screen will allow operation of
Magnetron #2 and show the number of
amps being drawn.
NEXT TEST: Press this pad to go to the
next Service Mode Test
PREV TEST: Press this pad to go to the
previous Service Mode Test
TURN ON: This pad will toggle between
turning the magnetron on and off.
CANCEL: Press this pad to return to the
Main Menu
RANGE: Under normal operation, the amp
draw should be 5 – 12 amps.
Convection Heater
Screen This screen will allow operation of the
convection heater and show the number of
amps being drawn.
NEXT TEST: Press this pad to go to the
next Service Mode Test
PREV TEST: Press this pad to go to the
previous Service Mode Test
TURN ON: This pad will toggle between
turning the heater on and off.
CANCEL: Press this pad to return to the
Main Menu
RANGE: Under normal operation, the amp
draw should be 5 – 12 amps.
4
5
6HUYLFH7HVW$;30;3