EasyManua.ls Logo

Amana FREESTANDING GAS RANGE User Manual

Amana FREESTANDING GAS RANGE
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
To the installer: Please leave this instruction book with the unit.
To the consumer: Please read and keep this book for future
reference.
Para el instalador: favor de dejar este manual de instrucciones
con la unidad.
Para el consumidor: favor de leer y guardar este manual para
futura referencia.
INSTALLATION INSTRUCTIONS
20" (50.8 CM) FREESTANDING GAS RANGE
with standard clean oven
INSTRUCCIONES DE INSTALACIÓN
ESTUFA AUTÓNOMA A GAS DE 20" (50,8 CM)
con horno de limpieza estándar
W10173755C
Table of Contents/Índice..........................................2
Question and Answer IconNeed help?

Do you have a question about the Amana FREESTANDING GAS RANGE and is the answer not in the manual?

Amana FREESTANDING GAS RANGE Specifications

General IconGeneral
Fuel TypeGas
TypeFreestanding
Burners4
Oven Capacity5.0 cu. ft.
ColorBlack

Summary

RANGE SAFETY

Safety Alert Symbol

Describes the symbol used to warn about potential death or injury.

Hazard Severity Definitions

Explains the meaning of "DANGER" and "WARNING" terms in safety messages.

Tip Over Hazard Warning

Warns about the risk of the range tipping over and causing injury or death.

INSTALLATION REQUIREMENTS

Tools and Parts

Lists required tools and supplied parts for installation.

Location Requirements

Specifies ideal placement and clearance for the range.

Mobile Home Requirements

Outlines specific installation rules for mobile homes.

PRODUCT DIMENSIONS AND CLEARANCES

Product Dimensions

Provides physical measurements of the range unit.

Installation Clearances

Details required spatial clearances for safe operation and installation.

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Warns about electrical hazards during installation and operation.

Grounding and Circuit Needs

Specifies requirements for proper electrical grounding and circuit protection.

GAS SUPPLY REQUIREMENTS

Explosion Hazard

Warns about explosion risks related to gas supply.

Gas Type and Conversion

Discusses natural gas vs. LP gas and conversion procedures.

Gas Supply Line Connection

Details how to connect the gas supply line to the appliance.

Flexible and Rigid Pipe Connections

Covers methods for connecting gas supply lines using flexible or rigid piping.

Gas Pressure Regulator and Testing

Explains the gas pressure regulator and required pressure testing procedures.

INSTALLATION INSTRUCTIONS

Unpack Range

Step-by-step guide for safely unpacking the appliance.

Install Anti-Tip Bracket

Instructions for securing the range to prevent tipping.

Verify Anti-Tip Bracket Location

Ensures the anti-tip bracket is correctly installed and engaged.

Level Range

Procedures for ensuring the range is level for optimal performance.

Make Gas Connection

Detailed steps for connecting the gas supply to the range.

CHECK OPERATION

Cooktop Burner Operation

Verifies ignition and flame adjustment for surface burners.

Electrical Shock Hazard

Reinforces electrical safety precautions during operation.

Oven/Broil Burner Operation

Checks ignition, flame quality, and adjustment for oven/broil burners.

Complete Installation Checks

Final checks and clean-up procedures before use.

Troubleshooting Range Operation

Guides on what to check if the range does not operate.

GAS CONVERSIONS

LP Gas Conversion

Steps and warnings for converting the range from natural gas to LP gas.

Natural Gas Conversion

Steps and warnings for converting the range from LP gas to natural gas.

Convert Gas Pressure Regulator

Steps to adjust the regulator for the specific gas type.

Convert Surface Burners

Instructions for changing orifices on cooktop burners for the new gas type.

Convert Oven Burner

Instructions for changing the orifice on the oven burner for the new gas type.

Complete Gas Conversion

Final checks and operational verification after conversion.

Related product manuals