Amana Front Loading Washers - Installer Checklist

Installer Checklist
Quick Checklist for Installing Washer (Refer
to manual for more detailed information)
• Position Washer near
Installation Area. See
page 6.
1
• Connect water inlet hoses.
See page 6.
2
• Connect drain hose to drain
receptacle. See page 7.
3
• Remove access panel. Remove
the shipping brace and shock
sleeves. See
page 8.
4
• Position and level the washer.
See page 9.
5
• Plug in washer. See
page 9.
6
• Verify Washer
operation. See page
10.
7
Part No. 686938
Printed in U.S.A.
©1998 Amana Appliances
Amana, Iowa 52204
Quick Reference For
Operating Washer
Quick reference for operating washer (Refer
to manual for more detailed information)
• Prepare clothes for washing. See Washing
Guide provided in literature packet for wash
sorting instructions.
1
• Load clothes in wash tub. Clothes should fill the
wash tub but should not be packed into the
wash tub. See page 14.
• Set WASH/RINSE
temperature.
See page 14.
3
• Select cycle
according to
type of fabric
being washed.
Pull out knob.
See page 15.
4
• Select EXTRA RINSE
if desired. See page
15.
5
6
• Add detergent to detergent dispenser. Do not fill
detergent dispenser cavity with detergent. Use
high efficiency detergent or
1
/3 of the
recommended amount of regular detergent.
• Add bleach and/or fabric softner if desired.
See page 16.
Detergent
dispenser
2
CPW13 0C