Amana RFS511MP Series User Manual

11
Deactivating Preprogrammed Pad
1. Open oven door.
• Display shows .
• Fan and light operate.
• If door is closed or (RESET) pad is pressed
before finishing programming sequence, oven
exits programming mode.
2. Press and hold pad 1 for approximately
15 seconds.
• After 15 seconds, signal sounds. Display shows
“P”.
3. Press desired number pad.
• Display shows heating time and power level
indicator (if other than 100 percent power).
4. Press hidden pad.
•“ dddd ” and pad number show in display.
5. Press (START) pad to save in oven memory.
• To reactivate pad, repeat steps.
6. Press (RESET) pad or close oven door to exit
programming mode.
Reactivating Preprogrammed Pad
1. Open oven door.
• Display shows .
• Fan and light operate.
• If door is closed or (RESET) pad is pressed
before finishing programming sequence,
oven exits programming mode.
2. Press and hold pad 1 for approximately
15 seconds.
• After 15 seconds, signal sounds. Display
shows “P”.
3. Press desired number pad.
• Display shows heating time, “COOK LEVEL” and
power level indicator (if other than 100 percent
power).
4. Press hidden pad.
• Display shows “0000” and .
5. Program pad according to “Preprogrammed
Number Pads” section step 5-7.
6. Press (START) pad to save in oven memory.
• To reactivate pad, repeat steps.
7. Press (RESET) pad or close oven door to exit
programming mode.
Hidden
pad

Amana RFS511MP Series Specifications

General

Brand	Amana
Model	RFS511MP Series
Category	Microwave Oven
Language	English