Amano MTX-30P/A972 - Punching with Magnetic or Barcode Card

Installation & Operation Guide Page 14 of 48
Validation Screen
Note: The name, assignments, and current pay period information can be downloaded from Time Guardian to the
MTX-30. An invalid finger entry will flash the error message, "FP Verify fail “. The Red LED will momentarily
stay on.
Punching with magnetic or barcode card
1. From the Welcome screen swipe your magnetic or barcode badge. (see figure).
2. Upon verification, the Green LED will momentarily stay on; the screen will briefly display your User ID, Name
and the confirmation "Verified." (see figure) with the voice prompt "Thank you"
Validation Screen
Note: The name, assignments, and current pay period information can be downloaded from Time Guardian to the
MTX-30. An invalid finger entry will flash the error message, "FP Verify fail “. The Red LED will momentarily
stay on.