2.6 2 in 1 Vacuum and Mop
Note:
· You can control the water flow through the APP.
· Empty the Reservoir and remove the cleaning cloth plate before cleaning on carpet.
· Be sure to use only water, and do not put washer fuid or any other cleaning solution in the reservoir.
· After the robot fnishes mopping, empty any remaining water from the reservoir.
① Remove the dust bin, and
pour water into the reservoir
through the water inlet.
②Stick the cleaning cloth on
the plate.
③Fix the cleaning cloth plate
on the dust bin.
④Install the dust bin back into
the robot.
19
To Next Page
Loading...
