4) Smart Area
5) Docking Mode
Area cleaning
After Smart Map generated successfully, you can divide the map into different areas according the cleaning needs. You can
set one or more cleaning areas. The robot will only clean the selected area.
No-go Zone
You can set the area that does not need to be cleaned as“No-go Zone”through the APP, and the vacuum robot will not enter
the no-go zone.
• Please make sure the robot has generated the smart map. The No-go zone will be lost when the map is rebuilt.
• The No-go zone may be lost due to changes in the location of the self-empty station or furniture.
Auto mode：When the battery power is low, the robot will prompt“Low power, start docking mode”, and returns to the charging
dock for recharge.
Manual mode：In any cleaning mode, press clean key twice or use app control, after voice prompt "start docking mode”, the
robot will automatically returns to the charging dock.
22
To Next Page
Loading...
