Method 1: Power on robot, after the startup music, press on panel.
Method 2: Click“Start cleaning”on APP to start cleaning.
Note：
If power is less than 20%, Robot will not work, please charge it before next cleaning.
If power is less than 20% during cleaning, the robot returns to the charging dock for recharge and resumes cleaning where it left off.
Click spot cleaning on APP Remote Control interface. After hearing “Start Spot Cleaning”, the robot will clean in “Spiral” route.
When cleaning is finished, robot will keep in standby mode.
Set the scheduled cleaning time on APP. The robot will automatically start cleaning at the time you set and return to the
charging base after cleaning.
To Next Page
Loading...
