1 / 40
Amazfit Cheetah (Square)
User Manual
Connection and pairing
Use your phone to scan the following QR code, and download and install the Zepp
app. For a better user experience, update the app to the latest version as prompted.
Note: Your mobile phone must run Android 7.0 or iOS 12.0 or later.
Initial pairing:
When the watch is started for the first time, the QR code is used for pairing displays
on the screen.
Open the Zepp app on your phone, log in to the app, and scan the QR code on the
watch to pair your phone with the watch.
Pairing with a new phone:
1. Open the app on your old phone and synchronize data with the watch.
2. On your old phone, go to the information page of the watch, tap Unpair at the
bottom of the page, and unpair the old phone from the watch. If it is an iPhone, you
also need to unpair the Bluetooth connection between the phone and the watch.
Please find the Bluetooth name corresponding to the watch in Settings-Bluetooth,
click the icon on the far right of the name, enter and click Forget This Device.
To Next Page
Need help?
General
