AUTO / ON
:
This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop. (FIGURE 2)
READY
:
The green LED light indicates the shredder in “On” and ready for use.
OFF
:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not
in use. (FIGURE 2)
REV
(
REVERSE
):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket. (FIGURE 2)
2
OPERATION
I
O
R
FIGURE 2
1) Hold the CD/DVD by the edge and feed
one at a time, releasing when shredding
begins.
2) Shredder will stop when the entire disc
has been destroyed.
DESTROYING CDs and DVDs
CAUTION! Do not hold CD/DVD with
finger through the center ring while
feeding into the shredder. Serious
injury may occur.
F
!
To Next Page
Loading...
Need help?
General
