Amazon B00YFTHJ9C - Operation

6 ENGLISH
Operation
CONTINUEDNEXTPAGE

ControlSwitch
 Usingtheswitchlocatedontheunit,selectoneofthefollowing
settingsbyslidingtheswitcheitherleftorright.(FIGURE2)
I Auto/On:Thissettingallowstheshreddertobeautomaticallystartedbyinsertingpaper
intothefeedslot.Alwaysfeedthepaperinasstraightaspossible.Whenthepaperhas
passedthrough,theshredderwillautomaticallystop.
O O:Thissettingturnsoallfeaturesoftheshredder.Forsafetyreasons,werecommend
thatyouleavetheshredderinthe“o”positionwhenevertheshredderisunattendedor
notinuse.
R Reverse:Intheunlikelyeventofapaperjam,thereversesettingcanbeusedtohelpclear
thecuttersofpaperthatdidnotpassthrough.Neverattempttoclearajambyusingthe
reversefunctionuntilyouhaveemptiedthewastebasket.
R Forward:Theforwardsettingcanalsobeusedtohelpclearthecuttersintheeventofa
paperjam.Thisallowstomanuallyactivatetheshredderintocuttingmode.
FIGURE2

