EN
3
4. Before First Use
DANGER
Risk of suocation!
» Keep any packaging materials away from children and
pets – these materials are a potential source of danger, e.g.
suocation.
» Remove all the packing materials.
» Check the product for transport damages.
» Before connecting the product to the power supply,
check that the power supply voltage and current rating
corresponds with the power supply details shown on the
product rating label.
5. Product Description
Control panel
A
Ventilation opening
B
On/o switch (I/O)
C
Carrying handle
(on both sides)
E
Caster without brake, x2
(rear casters)
F
Caster with brake, x2
(front casters)
G
Status indicator
L
CD/DVD feed slot
K
Paper/card
feed slot
J
Window
H
Bin
I
*Casters (
F
and
G
) are delivered separately.
Power cord
with plug
D
6. Placement and Setup
Push the bolts of the casters (F and G) into the bolt holes
securely on the bottom of the product.
NOTICE
Install the casters with brake (G) to the front;
install the casters without brake (F) to the rear.
x2
x2
G
F
NOTICE
Keep a minimum distances of 2" (5 cm) between
the product and any walls for sucient ventilation.
Product
Wall
2" (5 cm)
1. Move the product to the desired position. Engage the brakes
on the casters to avoid unintended rolling.
2. Connect the power plug (D) to a suitable socket-outlet.
3. Check that the bin (I) is properly closed. The product works
only when the bin is closed properly.