EasyManuals Logo

AmazonBasics OBL-0501000E User Manual

AmazonBasics OBL-0501000E
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
EN
7
6.4 DAB radio mode
Preset
Vol
Select
AlarmMenu/InfoScan
NextPrev321
3
/ Mode
NOTICE
If there is no DAB reception
at any time, change the position of the
product or adjust the antenna�
Press Mode to select DAB mode�
When the radio is switched on for the first time,
it will automatically do a full scan of DAB/DAB+
stations� The list of stations is then stored,
eliminating the need for another full scan when
the radio is turned on next time�
When the scan is complete, the stations are
stored in alphabetical order� The first available
station will be played back�
6.4.1. Changing DAB/DAB+ stations
1� Press the Prev or Next buttons in DAB
mode to navigate available DAB/DAB+
stations�
2� Press Select to confirm�
6.4.2. Auto scan in DAB mode
NOTICE
New stations and services
are added to the stored DAB/DAB+
stations� In order to make new DAB/DAB+
stations and services available on your
radio, run a full scan at regular intervals�
» Press and hold the Menu button in DAB
mode and then the Prev or Next buttons
until <Full scan> appears on the display
Press Select to confirm�
» The product scans all available DAB/
DAB+ stations and plays the first
available station� Alternatively, you
can activate the auto scan function by
pressing Scan
6.4.3. Displaying station information
1� Select a DAB station�
2� During DAB/DAB+ radio playback, press
Menu repeatedly to display the following
information (if available):
Ensemble
Frequency
Signal frequency error
Audio state and bit rate
Time
Date
Radio text
Signal strength
Programme type
Power status (mains or battery)
6.4.4. Manually storing DAB stations
You can store up to 20 preset DAB/DAB+
stations�
NOTICE
If there is already an existing
DAB station stored under a preset, it will
be overwritten when you store the new
station�
1� Select the desired station�
2�
Press and hold Preset for one second and
then confirm by pushing Select so that
<Preset 1 stored> appears on the display
3� Repeat steps 1 to 2 to store more DAB/
DAB+ stations�
4� Alternatively you can fast-preset your
favourite top 3stations by pressing
and holding the 1-2-3 button for
approximately 2seconds until “Preset
X stored” is displayed, where “XX” is the
number of the preset (1–20)�
6.4.5. Selecting preset DAB stations
1� Press Mode to select DAB/DAB+ mode�
2� Press Preset to access the Preset menu
<Preset Recall> <#: stored station
name>.
3� Use the Prev or Next buttons to select a
preset number and confirm your selection
by pressing Select

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AmazonBasics OBL-0501000E and is the answer not in the manual?

AmazonBasics OBL-0501000E Specifications

General IconGeneral
BrandAmazonBasics
ModelOBL-0501000E
CategoryPortable Radio
LanguageEnglish