Version 1.1 ©Copyright 2022, Ambient LLC. All Rights Reserved. Page 7
Connect to the network and then open a browser Note: you may be told network has no internet.
Navigate to the following IP address 192.168.4.1 you will be presented with the following screen.
(Note: default password is blank)
2.5 Finding the OBSERVERIPIP2.0 from your device (computer,
smart phone, or tablet with a browser) when connected to your
Local Area Network via Ethernet"
From your web browser, access the OBSERVERIP2.0 from the IP address in the previous section.
Select the Local Network tab to program the local network settings. Reference Figure 3:
To Next Page
Loading...
Need help?
General