Page 31 of 38
Domestic Hot Water
Start Up Procedure
✓ From the Main Display Screen press RETURN button and
this will take you to the Main Menu screen. Press the
ENTER button to select A. ON/OFF unit press ENTER
button to select Hydronic Operation Mode: OFF, HEAT
ONLY, COOL ONLY, AUTO
✓ Press ENTER and select Domestic H.W Mode from OFF to
Domestic H.W: ENABLE then press ENTER
✓ Press return button to MAIN MENU and press DOWN
arrow to select Clock/Scheduler
✓ Now press ENTER to select and set date and time using
the UP and DOWN arrows to change accordingly
✓ Press ENTER button until screen curser stops flashing then
press DOWN arrow to Clock Screen 02
Domestic Hot Water
Start Hour 1: 12:00
Start Hour 2: 23:00
✓ You can press ENTER to change desired hot water
heating start times
✓ Once set, press ENTER until the curser stops flashing
✓ Press the BACK arrow to clock screen 01
Clock Screen 01
Day: - - -
Date: - -/- -/- -
Hour: - -: - -
Enable Quiet Mode: NO
Enable Scheduler: NO
NOTE: On this screen, you will also see
Enable Quiet Mode: NO
If this function is selected to Quiet Mode: YES
The heat pump will ramp down in capacity and noise
level from 10:00pm to 9:00am
To Next Page