Ambient Lockit+ - Basic Button Operations

09Lockit+ Users manual |
6. Basic Button Operations
Turn On: Press and hold Power until LED lights green to start unit.
Turn O: Press and hold
Power for 5 seconds until power o menu
appears. Continue with additional button presses:
Power: Shutdown
Red: Standby
*
Red & Green: Reset WiFi / LAN settings
Access Menu: While the unit is running you can access the menu
by pressing
Red & Green simultaneously.
There you can easily set:
• Project Rate
• Sync Output
• ACN Channel
Tap
Red & Green simultaneously to conrm and proceed.
Tap Red to decrease or Green to increase a parameter value.
Reset: When switched o, press and hold
Red & Green
simultaneously to perform a factory reset of the Lockit Module.
All data on the web interface remains untouched.
*
Lockit Module running, web interface shut down