Ambu aScope - Page 9

EN
9
Display
Max. resolution 640*480
Response time 15ms
Maximum latency from camera < 200ms
Orientation Landscape
Display type 6.5” colour TFT LCD
Brightness control Yes, (“+” / ”-“)
Contrast control Yes, (“+” / ”-“)
Start up time About 10 seconds
Electrical power
Power requirement 12V 2.5A DC input
Battery type 7.2V 2200mAh Li-ion battery
Operating environment
Temperature 10 ~ 40°C (50 ~ 104°F)
Relative humidity 30 ~ 85%
IP Protection Classification System The Ambu® aScope™ Monitor is classified IP50.
Connection
Video signal standard NTSC
Video out connection 3.5mm jack socket
Video out cable 3.5mm jack plug to RCA jack plug
Storage
Temperature 10 ~ 40°C (50 ~ 104°F)
Relative humidity 10 ~ 90%
Mounting interface
Mounting interface standard VESA MIS-D, 75 C, VESA FDMI compliant display, Part D, with
centre located mounting interface
Fixture
Mounting interface 75mm (2.96”)
Fits poles with thicknesses 10mm ~ 45mm (0.4 ~ 1.8”)
Table 2 - Specification for the Ambu® aScope™ Monitor
Ambu® aScope™ power supply
Dimensions
Weight 245g (0.54lbs)
Electrical power
Power requirement 100 - 240V AC; 50-60Hz; 0.6A
Power out 12V DC; 2.08A
Operating environment
Temperature 10 ~ 40°C (50 ~ 104°F)
Storage
Temperature 10 ~ 40°C (50 ~ 104°F)
Relative humidity 10 ~ 90%