AMC 2N100-5 User Manual

INSTALLATION NOTES
Since the AMC 2N100-5/25100 generates modest
amounts of heat, adequate ventilation is reguired.
Do not place the amplifier on a soft surface such as
a carpeted surface that may block the ventilation
holes of the bottom cover. Also, avoid obstructing
the ventilation holes in the top cover.
CAUTION: To prevent the risk of fire or shock,
do not allow any liquid or moisture to enter into
the internal parts of this product. If any liquid
accidentally enters this product, shut off the
power and remove the AC power cord
immediately. If the liquid is anything other than
clean water or pure alcohol, have the product
examined by a service technician. Servicing of
this product should be referred to a qualified
service technician.
Your AMC amplifier is set to work on your local
mains supply voltage. Check that your local
mains supply voltage agrees with the voltage
setting indicated on the back panel of the
amplifier. If not, please contact your dealer or
national distributor for details on how to
proceed further.
The cores of the mains lead are coloured in
accordance with the following code:
Blue -Neutral
Brown -Live
Note: Export units for certain markets have
moulded majns plugs fitted as standard.
As the colours in the mains lead may not
correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked by the
letter N, or coloured black or blue. The wire which
is coloured brown must be connected to the
terminal which is marked by the letter L, or
coloured red or brown.
2

AMC 2N100-5 Specifications

General

Brand	AMC
Model	2N100-5
Category	Amplifier
Language	English