AMCOL 6000E - Introduction

6000E ELECTRONICALLY CONTROLLED PRECISION LUBRICATION SYSTEM
Operator’s Manual
P A G E | 2
1 Introduction
The AMCOL 6000E Electronically Controlled Precision Lubrication Applicator is an air
operated spray system used to accurately dispense minute quantities of liquid lubricants
and coatings used in the production and fabrication of metal. With this system, fluids are
injection metered from a gravity reservoir using patented positive displacement piston
pumps and then mixed with air at the spray point. Multi-point lubrication is accomplished
with multiple injectors or by splitting outputs at the spray point.
This operator’s manual describes the installation, operation, and maintenance of
your new AMCOL 6000E Precision Applicator. For more information on the system and the
individual components, please refer to the preceding document: “AMCOL 6000E
ELECTRONICALLY CONTROLLED PRECISION LUBRICATION SYSTEM - Technical Description.”