Page 5 of 13
Installation
Warning: Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another.
While moving the unit please note that it must always be kept upright and then placed on an even
surface.
1. Assemble the fishtail connector on to the hose.
2. Assemble the exhaust hose to the air conditioner body.
Extend one head of the hose and screw it into the unit anti-clockwise. The hose can be removed by screwing the
hose clockwise.
3. In the same way connect the hose to the assembled adaptor (at least three rotations).
4. Installation of window kits.
Partially open the window and then fix the window kit to the window.
5. Make sure the unit is upright and there are no obstructions to the air inlets and outlet grills.
To Next Page
Loading...
