AMD Confidential
User Manual November 21
st
, 2008
Chapter 14: BIOS Developer‟s Quick Start Guide 171
14.7 Creating a Floppy-Disk Image
Use the DiskTool utility to create a floppy-disk image file suitable for loading into the
simulator. DiskTool is located in the “SimNow\Tools" directory. To create an image of a
physical floppy disk, see Section 13, “DiskTool”, on page 161.
When the image has been created, it can be loaded into the simulation as described in
Section 5.1.1, “Open a Simulation Definition”, on page 40.
To Next Page
Loading...