AMD Confidential
User Manual November 21
st
, 2008
Chapter 3: Graphical User Interface 29
3.3.8 Ungrouping a created device group
Since a device group is really just a container for its child device's, with its own identity
as a device, it is simple to ungroup a device group, on either the GUI or the console. In
the show devices GUI, right-click a device group, click “Ungroup Device”. Or, in the
console, execute the command:
shell.UngroupDevice [created device group]
3.4 Main Window
The AMD SimNow™ Main Window, shown in Figure 3-1, is the main application
window. It contains a Menu Bar with a set of pull down menus, and a Tool Bar, both of
which control many aspects of the simulation environment. The console window, shown
in Figure 3-15, provides a textual interface for status information and command-line style
control, see Section A.7, “Automation Commands”, on page 227.
Figure 3-15: Console Window
3.4.1 SimStats and Diagnostic Ports
The SimStats and Diagnostic Ports numeric displays appear in the Main Window when a
Southbridge device is added to the workspace. The SimStats display shows host and
simulation elapsed time and a simulation MIPS counter that is updated as the simulation
runs. The simulator effectively has a built-in POST card output, ports 80h to 87h and e0h
to e3h. You can see these codes on the right upper part of the Main Window in the
"Diagnostic Ports" section.
To Next Page
Loading...