Need help?Do you have a question about the American Audio Model V 5000 and is the answer not in the manual?
Crucial safety guidelines and warnings for amplifier operation.
Welcome and overview of the V5000plus amplifier.
Guidelines for mounting the amplifier and obtaining customer support.
Gain control, limiter switch, and clip/protect indicators for Channel 1.
Gain control, limiter switch, and clip/protect indicators for Channel 2.
LEDs indicating signal presence, level, and amplifier operating modes.
Details on cooling fans, AC power input, and circuit breaker reset.
Explanation of XLR and TRS input jacks and THRU signal pass-through.
Description of binding post and Speakon speaker output connectors.
Using XLR and 1/4" TRS inputs for signal connection.
Polarity and connector usage for reliable speaker connections.
Instructions for connecting speakers using bare wires or spade connectors.
Introduction to Neutrik Speakon connectors for stereo and mono bridge modes.
Step-by-step guide for assembling Neutrik NL4FC Speakon connectors.
Illustrates pin configuration for Speakon connectors and speaker wiring.
Instructions for setting up and using stereo and mono bridge modes.
Guides for parallel mono, subwoofer, bridge subwoofer, and stereo subwoofer modes.
Explanation of the limiter and safe power levels for different speaker loads.
Details on how short circuit protection functions and indicates faults.
Information on thermal protection and input/output signal handling.
Adjusting gain controls and understanding LED indicators for operation.
Step-by-step instructions for changing the power plug to a 30 Amp connector.
Explains the terms, conditions, and coverage of the amplifier's warranty.
General| Signal to Noise Ratio | >100dB |
|---|---|
| Channels | 2 |
| Frequency Response | 20Hz - 20kHz |
| THD | <0.1% |
| Input Impedance | 20k ohms |
| Cooling | Fan-cooled |
| Protection | Thermal, short circuit, DC, overload |
| Input Connectors | XLR |
| Output Connectors | Speakon |
To Next Page