American DJ Quad Phase HP

To Next Page

1/13

User Instructions

ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 2

Quad Phase HP General Information

Unpacking: Thank you for purchasing the Quad Phase HP by ADJ

Products, LLC. Every Quad Phase HP has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all equipment necessary to operate the unit

has arrived intact. In the event damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Please do not return this unit to your dealer without

contacting customer support rst.

Introduction: The Quad Phase HP is a four channel, DMX intelligent

LED moonflower fixture. The fixture can operate in as a stand alone

fixture or in a Master/Slave configuration. The Quad Phase HP has two

operating modes; sound active and DMX Control. For best results use

fog or special effects smoke to enhance the beams projections.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! This may cause eye damage. Avoid looking directly into the

light source. Use sensible precaution.

Main Page

Need help?

Do you have a question about the American DJ Quad Phase HP and is the answer not in the manual?

Summary

General Information

Unpacking Instructions

Guidelines for checking the shipping carton and fixture for damage upon arrival.

Product Introduction

Overview of the Quad Phase HP as a DMX intelligent LED moonflower fixture.

Customer Support Contact

Details ADJ's toll-free customer support line and service hours.

Safety Precautions

Essential Safety Guidelines

Critical safety instructions to prevent electrical shock, fire, and eye damage.

Setup and Configuration

Power Supply and Voltage

Information on the automatic voltage sensing feature for universal power use.

DMX-512 Protocol Explained

Explanation of the DMX-512 protocol for communication between fixtures and controllers.

DMX Linking and Data Cables

Requirements for DMX data cables and how to link fixtures in a DMX chain.

Installation and Connectivity

XLR Connector Conversion

Guide to converting between 3-pin and 5-pin XLR connectors for DMX transmission.

Installation Best Practices

Instructions for safely mounting and securing the fixture for operation.

System Menu Operations

Navigating the System Menu

How to access and navigate through the fixture's system menu options.

Setting DMX Address

Step-by-step process to set the DMX address for fixture control.

Master;Slave Setup

Configuring units for Master/Slave operation for synchronized control.

Sound Active Mode Setup

Activating and configuring the sound active mode for music synchronization.

Adjusting Sound Sensitivity

Guide to adjusting the sound sensitivity level for the sound active mode.

System Menu Functions

Display Orientation Control

How to reverse the display orientation 180 degrees for flexible mounting.

Running Self-Test

Instructions to perform a self-test to check fixture functionality.

Viewing Temperature Data

How to display the current operating temperature of the fixture.

Checking Fixture Runtime

How to view the total operational time of the fixture.

Software Version Information

How to check the installed software version of the unit.

Operation Modes

Universal DMX Control

Utilizing a DMX controller for advanced control of patterns, dimming, and strobing.

Sound Active Mode Operation

How to operate the unit in sound active mode, reacting to music beats.

Master;Slave Sound Active

Linking multiple units for synchronized sound-activated master/slave operation.

Advanced Features

Power Cord Daisy Chain

Connecting multiple fixtures in series using IEC input/output sockets.

UC3 Controller Integration

Using the optional UC3 controller for functions like blackout and strobe effects.

DMX Channel Functionality

Detailed description of DMX channels, values, and their corresponding functions.

Remote Control, Maintenance, and Troubleshooting

ADJ-RC1 Remote Operation

Instructions for operating the fixture with the optional ADJ-RC1 infrared remote.

Fuse Replacement Procedure

Step-by-step guide for safely replacing the internal fuse.

Fixture Cleaning Guide

Recommended methods for cleaning optical components and casing for optimal performance.

Troubleshooting Common Issues

Solutions for prevalent problems such as no light output or lack of sound response.

Warranty Information

Manufacturers Limited Warranty Terms

Detailed terms, conditions, and periods of the manufacturer's limited warranty.

Product Specifications

Technical Specifications Summary

Overview of the fixture's technical details including model, power, dimensions, and warranty.