Advanced Features
20 Intellex® Digital Video Management System
Searching by Camera
Click Cameras to search for segments by camera.
Searching by Alarms
Click Alarms to search for segments based on alarm information.
Searching Using Filters
1 From the Search Mode page, click With Image
Filters.
2 Click the Filters tab.
3 Select a camera.
4 Set the length of time that search should skip
ahead after a qualified video segment is found.
5 Select the type of filter to search the database.
6 Click Setup to configure the filter.
Include segments from all
cameras or a specific
camera in the search.
Includes segments
regardless of alarm input.
Includes any segments
with an alarm input.
Includes segments with a
specific alarm input.
Includes all
video loss segments.
Includes all segments with
generated alarms.
Includes any segments that
were recorded because a
specific filter was triggered.
Includes segments that
were recorded because a
filter was triggered.
Includes segments
regardless of filter criteria.