Advanced Features
User’s Guide 21
7 To define the filter’s target area:
• Move the cursor over the image area.
• Draw the boundaries by clicking and moving the
mouse to each corner of the target area and clicking
again.
• After enclosing the target area, click again to fill shape.
8 Set the sensitivity level.
Note
Sensitivity is based on the size of the highlighted area. At higher sensitivity settings, smaller
changes trigger the filter. At lower settings, larger changes are required to trigger the filter.
Therefore, a large area may require a higher sensitivity for a small amount of movement.
9 Click Apply.
Searching Using Text Associated with Cameras
1 From the Search Mode page, click Text Streams. The search dialog displays criteria tabs:
Date/Time, Text Streams, and Text Criteria.
2 Select String Search or Advanced Search (does not apply to Intellex IP). The displayed tabs
depend on the text search selected. Advanced Search adds the Receipt Definitions tab.
Searching by String
You can search for any string associated with the camera or instrument.
1 Select String Search.
2 Select the Date/Time tab.
3 (Optional) Enter Date/Time criteria.
4 Select the Text Streams tab to enter text stream criteria. You can:
• Select Any Text Stream to search all text streams on the Intellex unit
•Select Specific Text Stream. Select a stream from the list.
5 To define your search, click Text Criteria.
Advanced Searches
1 Select Advanced Search.
2 Select the Date/Time tab.
3 Enter Date/Time criteria (optional).
4 Select Text Criteria (optional). This screen displays text exceptions.
Text Options
Configure the Intellex unit to record text streams associated with cameras.
To Next Page
Loading...
Need help?
General
