P
age 10 of 11
AE-1220 / AE-3050 /
AE-4065 / AE-5080
Operation Manual
773.376.0800 (P) • 773.376.2010 (F) • 3131 S. Canal St. Chicago, IL 60616
Revision 1/2017
Troubleshooting
Issue Possible Cause
Check to see that the bowl guard is in lower position.
Check electric cord to see if it is plugged into
receptacle.
Check electrical supply at breaker (fuse) box.
Check electrical box.
Check that the Emergency STOP button is reset by
twisting knob clockwise.
Mixer bowl and/or hook run in the opposite direction
than what is indicated on the control panel.
The polarities on the electrical plug are reversed.
Have an electrician match the correct wires with the
correct contact point on the 3 phase plug.
There is a rhythmic, loud clicking or hitting noise
while the mixer is in operation.
There may be a broken ball bearing—most likely a
ball bearing meant to provide smooth operation of the
rotating bowl.
Mixer will not start.
To Next Page
Loading...