P
age 5 of 11
AE-1220 / AE-3050 /
AE-4065 / AE-5080
Operation Manual
773.376.0800 (P) • 773.376.2010 (F) • 3131 S. Canal St. Chicago, IL 60616
Revision 1/2017
INSTALLATION:
1. The machine shipped fully assembled, and ready for installation. It must be installed on
a level floor. It should be placed in a location that is convenient for both operation and
maintenance. The machine’s safety features make it possible to stand close to the
machine during operation.
2. Thoroughly clean the machine before using. Refer to Cleaning Procedures section.
3. Contact American Eagle if you have any questions or problems with the installation or
operation of this mixer. Do not return to retailer or dealer!
MOVING THE MIXER:
1. Do not push or drag the machine on the floor.
2. Adjust the machines stabilizing feet so they are raised from the floor. The spiral mixer
has castors underneath the frame that will allow you to roll the mixer safely across a
smooth floor. Once the mixer is in the desired position, adjust the machine’s stabilizing
feet, so that the machine is level on the floor with the castors suspended from the
surface.
Installation Instructions
THIS MACHINE IS DESIGNED FOR USE WITH A THREE PHASE
PLUG FOR
PROPER GROUNDING. THE OUTLET USED WITH THE PLUG MUST BE
PROPERLY GROUNDED. CONTACT AN ELECTRICIAN TO FIX YOUR OUTLET IF
IT IS NOT THE PROPER TYPE BEFORE OPERATING THE MACHINE. DO NOT
REMOVE OR CUT OFF THE GROUND PRONG OR USE AN ADAPTER PLUG.
To Next Page
Loading...