7
5800 SE 78th St. Ocala, FL 34472
IC Controller Operations Manual
P: (800) 327-3015
E: Service@americanpanel.com
Low Air Alarm Setting
The display will alternate between and the value
This setting indicates the low temperature threshold, if the cabinet temperature goes below this setting,
the alarm will go off.
Use UP or DOWN buttons to set the desired value and press ENTER to conrm.
Alarm Delay
The display will alternate between and the value
This setting indicates the amount of time in minutes the controller will delay the temperature alarm.
Use UP or DOWN buttons to set the desired value and press ENTER to conrm.