Need help?Do you have a question about the American Standard Link UX360 and is the answer not in the manual?
General| Brand | American Standard |
|---|---|
| Model | Link UX360 |
| Category | Thermostat |
| Language | English |
Log into the American Standard Home website to set your customized schedule easily.
Track cooling and heating system runtime history by downloading it from American Standard Home.
Allows your local dealer to remotely monitor your home's heating and cooling system data.
Manually set the Date & Time. No need to update when connected to American Standard Home.
Connect to a Wi-Fi network and access advanced setup and diagnostics.
Restart the thermostat and all communicating equipment on the system.
Select which temperature unit (°F or °C) you would like the thermostat to display.
The temperature range separating heating and cooling setpoints where systems do not operate.
Configure indoor sensor calibration when the thermostat is assigned as an indoor sensor.
Adjust display brightness, backlight, screen saver, and color themes for the thermostat.
Configure the screen saver to display nothing until the screen is touched.
Set how long the screen remains at active brightness after the last user interaction.
Select from various color themes for the thermostat display interface.
No restrictions applied to thermostat functionality.
Menu access is disabled for users.
Menu access disabled, configurable limit for heating/cooling setpoints.
Access is disabled for all thermostat settings.
View your local weather conditions, including current temperature and forecasts.
Get a detailed 5-day weather forecast for your location.
Set or change the weather location by entering your zip code or postal code.
Select the desired indoor humidity target for optimal comfort.
Configure frost protection settings that may override target humidity during heating.
View active system alerts and notifications for potential issues.
See system notifications like air filter reminders and service alerts.
Displays detailed information about the thermostat and communicating equipment.
Assign a custom, meaningful name to your thermostat system.
Set predetermined cooling and heating set points for Home, Away, and Sleep periods.
Activate configured presets quickly from the Home or Preset Screen.
The UX360 Thermostat adjusts temperature settings throughout the day according to a user-programmable schedule.
Adjust temperature settings and period start/stop times for scheduled periods.
Add new time periods to the thermostat's schedule.
Remove unwanted time periods from the thermostat's schedule.
Steps to add Z-Wave devices to the network via the thermostat.
Steps to remove Z-Wave devices from the network via the thermostat.
Steps to add Z-Wave devices to the network using the mobile app.
Add the bridge to an existing network by following primary controller instructions.
Remove the bridge from American Standard Home, disabling remote control features.
Reset all Z-Wave information and remove all devices from the bridge.
Information on using the bridge as a secondary or inclusion controller in the network.
Ensure the latest software revision is installed for full feature benefits.
To Next Page