- 1 -
M965908 (7/18)
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American-Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
Flash
™
Deck Mount
Tub Systems
Rough Valve Kit
INSTALLATION
INSTRUCTIONS
R900
R910
ROUGHING-IN
1
FINISHED DECK VARIABILITY
ACCOMMODATES DECKING
MATERIAL (TILE, MARBLE,
CORIAN
®
...) TO 1" THICK
2. FINISHED DECK
3. FITTING MOUNTING SURFACE
4. ACRYLIC BATHS
DECK MOUNTING HOLES
ADJUSTABILITY, TO 1-1/2" THICK
1. DECK THICKNESS
TOTAL DECK THICKNESS
UP TO 2-1/2"
ADJUSTABILITY, TO 1-1/2" THICK
2
3
4
FINISHED
DECK
FITTING
MOUNTING
SURFACE
ACRYLIC
BATH
MOUNTING
1
1/2" COPPER
INLET SUPPLIES
1-3/8" D
MAX.
1-3/8" D MAX.
1-3/8" D
(2) 1-3/8" D
HOLES
(3) 1-3/8" D
HOLES
8" to 12" for Copper tubes
12" for Flex hoses
7-1/8"
1-1/2" D
8" to 12" for Copper tubes
12" for Flex hoses
2
MOUNT SPOUT SHANK
SPOUT SHANK LOCK RING FLUSH WITH
TOP OF THREADS ON SPOUT SHANK
SPOUT SHANK
LOCK RING
SPOUT SHANK
FRICTION WASHER
SPOUT SHANK
MOUNTING
NUT
1-1/2" MAX.
MOUNTING
SURFACE
PLUG
Certied to comply with ANSI A112.18.1
U.S. Patent No. D403,750
• Drill holes in mounting deck as shown on STEP 1. The maximum allowable deck thickness is 1-1/2".
• Unthread PLUG from SPOUT SHANK.
• Insert the SPOUT SHANK through the mounting deck from below. Assemble the SPOUT SHANK LOCK RING so it
is ush with the top of the threads on the SHANK.
• Tighten SPOUT SHANK MOUNTING NUT securely.
• Thread PLUG into SPOUT SHANK.
To Next Page
Need help?
General
