American Standard SELECTRONIC 605XTMV1070 User Manual

Installation Instructions
Installation Instructions
SELECTRONIC
™
Thermostatic Mixing Valve
Certified to comply with ASME A112.18.1M
© 2019 American Standard
M965327 REV. 1.2
605XTMV1070
Specifications
Installation
Adjust Temperature
Service
Replacement Parts
1
2
3
3
4
NOTE TO INSTALLER: Please give this manual to the customer after installation.NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Selectronic
®
Products visit our website at: www.americanstandard-us.com
or e-mail us at: CRTTEAM@lixilamericas.com
For Parts, Service, Warranty or other Assistance,
please call (844) CRT-TEAM / (844) 278-8326 (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-306-1093)

American Standard SELECTRONIC 605XTMV1070 Specifications

General

Brand	American Standard
Model	SELECTRONIC 605XTMV1070
Category	Control Unit
Language	English

Summary

Specifications

Installation

Unpacking

Steps for unpacking the mixing valve and associated components from the carton.

Mount Enclosure

Detailed steps for mounting the mixer enclosure to the wall surface using screws and anchors.

Connect Mixing Valve

Procedure for connecting the mixing valve to its enclosure with a swivel nut.

Connect Mixing Valve to Water Supplies

Instructions for connecting the valve to hot and cold water supplies using flexible hoses.

Adjust Temperature

To Adjust Temperature

Procedure for adjusting the main temperature setting using a 4mm hex wrench.

Adjust Hot-Limit Safety Stop

Steps for adjusting the hot-limit safety stop to regulate the hot water limit.