To Next PageTo Next Page
Need help?Do you have a question about the American Standard YCY036G1M and is the answer not in the manual?
General| Brand | American Standard |
|---|---|
| Model | YCY036G1M |
| Category | Air Conditioner |
| Language | English |
Identifies unit models and product type.
Warns about hazardous voltage and the need to disconnect power before servicing.
Details critical steps and warnings before starting installation.
Outlines steps for inspecting the unit upon arrival.
Alerts to risks associated with fuel substances and combustion by-products.
Illustrates rooftop installation using full perimeter curbs for models YCY024-060G.
Shows rooftop installation using BAYCURB030A curb type for models YCY024-060G.
Provides detailed measurements and weights for various YCY unit models.
Lists minimum clearance requirements for servicing the unit.
Specifies safe distances from the unit to combustible surfaces.
Details the process of changing airflow from horizontal to downflow.
Specifies clearances and roof hole sizes for installation.
Provides guidance for installing units with horizontal airflow.
Instructions for mounting units on a roof curb for downflow airflow.
Discusses factors for selecting unit location and required clearances.
Provides instructions for safely lifting and positioning the unit.
Details the procedure for setting the unit onto a roof curb.
Illustrates rooftop unit installation using a field-fabricated frame.
Describes installation of units at ground level with horizontal airflow.
Outlines specifications for condensate drain line installation.
Guidelines for connecting downflow ducts to the roof curb.
Instructions for attaching horizontal ductwork to the unit.
Warns about potential health hazards from fiberglass insulation.
Details pipe sizing and pressure requirements for natural gas supply.
Provides critical safety warnings for gas pressure testing.
Shows illustration of the burner and gas valve assembly.
Illustrates the flue and hood components of the unit.
Guides for checking and adjusting gas input and manifold pressure.
Specifies adjustments needed for units installed at high altitudes.
Provides instructions for installing air filters in the unit.
Covers electrical wiring, grounding, power supply, and connections.
Displays the wiring diagram for the YCY-G unit, including thermostat and economizer connections.
A comprehensive checklist to verify before initiating unit start-up.
Instructions for safely starting the unit for cooling operation.
Details the sequence and procedure for initiating the heating cycle.
Step-by-step guide for starting the unit in gas heating mode.
Procedures for checking and adjusting manifold pressure.
Explains the meaning of different LED flash codes for diagnostics.
A comprehensive list of checks to perform after installation is complete.
Describes the step-by-step operation during heating cycles for different thermostat types.
Explains the sequence of operations during the cooling cycle.
Information on adjusting the indoor fan motor speed using dip switches.
A chart to diagnose system faults based on symptoms and causes.
Tasks the owner can perform for regular unit maintenance.
Recommended maintenance checks for a qualified serviceman during cooling and heating seasons.
Step-by-step instructions for cleaning the unit's flue.
